Model Number

LSM-400

LSM-400 is intended for milling it is grooving in house sawn timber and structural building balks.

Technical features:

The machine is applied in house building productions,for constructive beam fluting. Workpiece is firmly put on tables and pneumatic hold-down tool is powered up. Vertical pneumatic barrels workpiece presses to the tables, horizontal - to tappet bars. The buttons located on the control panel turn on gyration of spindles, then horizontal and vertical supply in turn. Having cut a slot, the support is automatically reset. Adjustment of depth slot seated is carried out by screws supplied with counters.

Technical description:

1.Pass-through section of blanks (W墜): - maximum, mm 400 x 250 - minimum, mm 50 x 20 2.Quantity of tenoning spindles, pcs. 4

3.Type of processed stock lumber of any species

4.Quantity of pneumatic-cylinders, pcs. 4

5.Nominal air pressure in airset, Mpa 0,6

6.Diameter of outtake branch, mm 200

7.El. motor of tenoning spindle pcs./7, 5kilowatt/3000 rpm

8.El. motor of horizontal tenoning unit drive 1 pcs./0,75 kilowatt/1500 rpm

9.El. motor of vertical tenoning unit drive 1 pcs./4 kilowatt/1500 rpm

10.Giving speed of tenoning units, m/min. 0-12(smooth)

11.Supply network: - type of current variable 3 phase - frequency of current, Hz / voltage, In 50 / 380

12.Installed power, kilowatt 32,25

13.Overall dimensions (length x width x height), m: 2,89 x 1,99 x 2,79 14.Mass of machine, kg 2500